IlTossico

joined 1 year ago
[–] IlTossico@alien.top 2 points 11 months ago

You need to be deaf to not hear an HDD, and Helium one are generally very noisy.

[–] IlTossico@alien.top 1 points 11 months ago (1 children)

I don't use Plex, but for what i know:

" Limitations

When relaying a connection through us, there are limitations for the streaming qualities you can use:

- Free users are limited to 1 Mbps maximum for streams

- Plex Pass subscribers are limited to 2 Mbps maximum for streams

If the content you’re trying to stream has a higher bitrate, then your Plex Media Server will need to transcode the content down to fit the limitation. "

https://support.plex.tv/articles/216766168-accessing-a-server-through-relay/

Anyway, those are all stuff an integrated iGPU can do, for a much lower power consumption. The point is, it's preferable avoiding spending more money in electricity bill and on HW to buy an external GPU.

[–] IlTossico@alien.top 1 points 11 months ago (3 children)

All consumer Nvidia cards are limited by software to 1. Even a 4090. You need to hack the firmware and modify it to get more than 1 at the same time. Then with a Quadro card you are limited by the power. But it's not worth getting a 200€ GPU for 5 transcodes when you can have an 80€ CPU that does the same with the integrated iGPU. Not only, why do I need an external GPU that idles at 20/30W more when my Intel CPU can idle at 1/2W.

External transcodes are limited to 720p, so it's obvious your GPU is doing it fine. A G5400 can do around 21x1080p transcode at the same time, so 720p is probably double, for comparison.

[–] IlTossico@alien.top 1 points 11 months ago

You can switch to a generic desktop PC with a desktop Intel CPU. Or change your server for a generic chassis and popolate with a desktop motherboard and CPU from Intel.

[–] IlTossico@alien.top 1 points 11 months ago

Don't worry, they have a lot of shelves too.

[–] IlTossico@alien.top 1 points 11 months ago (2 children)

Are you living in the 90'? Hardware transcoding is a thing of the present.

[–] IlTossico@alien.top 0 points 11 months ago (5 children)

You don't need another GPU, you already have one, and a very good one as decoder and encoder. The iGPU on the Intel CPU.

Anyway, if you don't plan to have VMs, the i5 is overkill, if you need a new system, the i3 still overkill but better, a G7400 would be another alternative. A dual core is fine, with 16GB of ram, 32 are overkill. Both the i3 and the G7400 would be fine, and would give you space for HW transcoding with the iGPU. For reference, an i3 13th gen is capable of 5/6 4k stream at the same time. External GPU like Nvidia desktop are limited to 1 transcode at the same time, you need an expensive Quadro to match the iGPU capability, no worth the money, and you would just add more power consumption for nothing.

Nice PSU, finally someone that understand that you don't need 800W to run a NAS that idle a 10W.

As OS, i suggest to look into unRAID, is a Hypervisor that run on RAM, very light, easy to setup and maintain. It's a pay software, but you can try it free for 30 days.

[–] IlTossico@alien.top 1 points 11 months ago (2 children)

It is a meme post?

It's an enterprise server, with dual sockets, a lot of cores and ram. Not built with power saving in mind. And not built to be used on a home.

Have you done any research before buying it? Probably no.

That is normal power consumption behavior. And you are lucky that it consumes not that much for what it has.

[–] IlTossico@alien.top 1 points 11 months ago

Sell what you have and buy a generic desktop computer. Voilà. If you already have a desktop or laptop that you don't use at home, use it as your server and turn off the enterprise stuff.

[–] IlTossico@alien.top 1 points 11 months ago (1 children)

Of course. But there are situations of people posting about some very old stuff, that even for free or for tinkering, wouldn't be good. We are talking about vintage stuff, maybe good if you want to make an old homeland, to run just old stuff. What can I say in those situations other than that.

[–] IlTossico@alien.top 1 points 11 months ago

If someone asks for advice before buying, no problems, there are already people asking for those and we are mostly polite about those, saying why an old server wouldn't be the best solution.

But for someone that already has one, and post of it, I can only make some satire about it. We are talking about vintage stuff. And, I need to admit, I'm the first to love that old stuff, but I would compliment someone if it posts it on a vintage sub, but on Homelab we need working stuff, with real benefits, it's a different manner.

[–] IlTossico@alien.top 1 points 11 months ago (5 children)

L O L

What can I say to someone that gets an OLD IBM with a dual socket 4 cores CPU, with 2 GB of ram and thinks he hit a jackpot, for 100€, with a system that idles at 200W and has the power of an i3 first gen.

Of course it's a heater, or a door stop, what other things you can do with that system.

Would be better if those people maybe posted before buying those systems, for shopping suggestions. That's a topic. Not your complaints.

view more: next ›